ECS100 - XP Power ECS100 Series Power Supply. Input Voltage: 80-264 VAC | Input Frequency: 47-400 Hz | Output Voltage: 12-48 VDC | Operating Temperature: -20 to 70 C

ECS100 - XP Power ECS100 Series Power Supply. Input Voltage: 80-264 VAC...

Request Quote
For Price

Part Number:: ECS100
Model Number:: ECS100
Make:: XP POWER
Lead Time:: Available
Qty In Stock:: Available

XP Power ECS100 Series Power Supply. Input Voltage: 80-264 VAC | Input Frequency: 47-400 Hz | Output Voltage: 12-48 VDC | Operating Temperature: -20 to 70 C | Operating Altitude: 3000 m Simple Type: Power Supply

The ECS100 Series has been designed to minimize the no load power consumption (<0.5 W) and maximize efficiency in order to facilitate equipment design to the latest environmental legislation. Approved for Class I and Class II applications, the ECS100 range of single output AC-DC, 100 W power supplies feature high power density in an industry standard 2 x 4" (51.0 mm x 102.0 mm) footprint. The 1.20" (31.0 mm) high, 1U compatible high-density power supplies meet EN55022 Level B conducted emissions with low earth leakage currents of 100 µA at 115 VAC or 215 µA at 230 VAC. Making these switchers ideal for industrial, IT and medical applications. The ECS100 series has single output versions from 12 V to 48 VDC, adjustable by ±10%. They are dual-fused for compliance with IEC60601-1 and efficiency is 88% typical, so minimal excess heat is generated. The ECS100 require only 10 CFM of cooling to delivers a full 100 W of power up to +50 °C and operates at up to +70 °C with derating or equally supply 80 W when convection- cooled up to +50 °C with operation to +70 °C with derating.

Download the datasheet (PDF)

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Features

80/100 W - Convection/Forced-cooled Ratings
Class I & Class II Construction
Green Mode, <0.5 W Standby Power
Industry Standard 2” x 4” Package
IT & Medical Safety Approvals
Low Leakage Current

Specifications

General

Conducted Immunity: EN61000-4-6, level 3 Perf Criteria A
Cooling: Convection & fan cooled ratings (see tables)
Dips & Interruptions: EN61000-4-11, 30% 10 ms, 60% 100 ms, 100%5000 ms, Perf Criteria A, B, B, EN60601-1-2, 30% 500 ms, 60% 100 ms, 100%10 ms, 100% 5000 ms, Perf Criteria A, A, A, B - 230 VAC. Consult longform datasheet for 115 V operation
Drift: ±0.2% after 20 min warm up
Earth Leakage Current: 230 µA at 264 VAC/60 Hz max.
Efficiency: 88% typical
EFT/Burst: EN61000-4-4, level 3 Perf Criteria A
Emissions: EN55022 level B conducted EN55022 level A radiated
Equipment Protection Class: Class I and Class II
Harmonic Currents: EN61000-3-2, class A
Hold Up Time: 16/75 ms min at 115/230 VAC
Initial Set Accuracy: ±1%
Input Current: 1.5 A typical at 115 VAC, full load, 0.9 A typical at 230 VAC, full load
Input Frequency: 47-400 Hz (See note 1)
Input Protection: Internal T5 A/250 V fuse in line and neutral
Input Voltage: 80-264 VAC (120-370 VDC), derate output power <90 VAC, see derating curve
Inrush Current: 40 A max at 230 VAC, cold start 25 ºC
Isolation: 4000 VAC Input to Output, 1500 VAC Input to Ground, 500 VDC Output to Ground
Line Regulation: ±0.5% max
Load Regulation: ±1%
Low Voltage PSU EMC: EN61204-3, high severity level as below
Minimum Load: No minimum load required
MTBF: 834 kHrs to MIL-HDBK-217F at 25 ºC, GB 1245 kHrs to Telecordia SR-332 at 25 ºC, GB
No Load Input Power: <0.5 W
Operating Altitude: 3000 m
Operating Humidity: 95% RH, non-condensing
Operating Temperature: -20 °C to +70 °C derate linearly from +50 °C at 2.5%/°C to 50% load at +70 °C.
Output Voltage: 12-48 VDC (see tables)
Output Voltage Trim: ±10%
Over/Undershoot: 5% typical
Overload Protection: 110-150%
Overvoltage Protection: 115-140% Vnom, recycle input to reset
Power Density: 10 W/in3
Power Factor: EN61000-3-2, class A
Radiated Immunity: EN61000-4-3, level 3 Perf Criteria A
Ripple & Noise: 1% pk-pk V1, 20 MHz bandwidth
Safety Approvals: IEC60950-1 CB report, CSA 22.2 No. 60950-1, UL60950-1, TUV EN60950-1 IEC60601-1 CB report, CSA 22.2 No. 60601-1, UL60601-1, TUV 60601-1
Shock: 30 g pk, half sine, 6 axes
Short Circuit Protection: Continuous trip and restart (Hiccup mode)
Start Up Delay: 1stypical
Start Up Rise Time: 50 ms
Storage Temperature: -40 °C to +85 °C
Surge: EN61000-4-5, installation class 3 Perf Criteria A
Switching Frequency: 65 KHz typical
Temperature Coefficient: 0.05%/°C
Transient Response: 4% max. deviation, recovery to within 1% in 500 µs for a 50-75-50% load change
Vibration: 2grms,5Hzto500Hz,3axes
Voltage Flicker: EN61000-3-3

Applications

None Available

Aliases

None Available

XP POWER Industrial Partner