CFP500PS48FE - XP Power CFP500PS48FE AC/DC; 500W Power Supply Simple Type: Power...
- Part Number:
- CFP500PS48FE
- Model Number:
- CFP500PS48FE
- Make:
- XP POWER
- Lead Time:
- Available
- Qty In Stock:
- Available
XP Power CFP500PS48FE AC/DC; 500W Power Supply Simple Type: Power Supply
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 5 Modules in 1U Rack Space
- Internal ORing Diodes for Hot Swap Redundancy
- International Safety Approvals
- Measures only 10.20” x 3.39” x 1.59”
- Mounting Height 1U Horizontal, 2U Vertical
- Optional 19” Rack for up to 5 Modules 2500 W
- Universal AC Input Active PFC
Specifications
- Cooling: Internal fans with front to back airflow
- Current Share: Single wire. Within ±5% for +12 V or ±10% for 48 V
- Earth Leakage Current: 3 mA max at 250 VAC
- Efficiency: 85% typical for +12 V; 82% typical for +48 V
- Hold Up Time: 16 ms for +12 V, 10 ms for +48 V
- Initial Set Accuracy: ±0.2%
- Input Current: 6.9 A at 90 VAC, 2.6 A max at 230 VAC
- Input Frequency: 47-63 Hz
- Input Protection: Internal 10 A/250 VAC fuse
- Input Voltage: 85-264 VAC
- Inrush Current: 20 A max per ETS 300 132 & Bellcore
- Isolation: 3000 VAC Input to Output; 1500 VAC Input to Ground; 500 VAC Output to Ground
- Line Regulation: 0.1% max for +48 V
- Load Regulation: ±0.5% max for +48 V; +12 V total (line & load) regulation ±2%
- Minimum Load: No minimum load required
- MTBF: 300 kHrs demonstrated
- Operating Altitude: 2250 m
- Operating Humidity: 30-95% RH, non-condensing
- Operating Temperature: -20 °C to +70 °C, derate linearly from 55 °C at 10 W/°C
- Output Voltage: +12 or +48 VDC
- Output Voltage Trim: ±10% for +12 V or ±1.5 V for +48 V
- Over-temperature Protection: Shuts down at +110 °C internal temp with auto recovery below +95 ºC
- Over-Voltage Protection: 116-128% Vnom, recycle input or Remote On/Off to reset
- Overload Protection: 110-130% typical, auto recovery
- Power Density: 9.1 W/In3
- Power Factor: 0.99 typical
- Remote On/Off: On - Logic High or Open; Off - Logic Low or Short
- Ripple & Noise: 1% max pk-pk per ETS 300-132-2, measured at 20 MHz bandwidth
- Shock: IEC68-2-27, MIL-STD-810E, Telcordia GR-63-CORE & GR-487-CORE
- Short Circuit Protection: 54 A max for +12 V, 25 A max for +48 V
- Signals: DC OK, Output current monitoring, Overtemp monitor, OVP monitor
- Start Up Delay: 2 s at mains, 20 ms using Remote On/Off
- Start Up Rise Time: 50 ms max
- Storage Temperature: -40 °C to +85 °C
- Switching Frequency: 100 kHz typical for PFC stage; 200 kHz typical for main converter
- Temperature Coefficient: 0.04%/°C
- Transient Response: +12 V: 2% max. deviation, recovery to 1% in 300 µs for a 50% load change; +48 V: 2% max. deviation, recovery to 1% in 400 µs for a 50% load change;
Applications
- None Available
Aliases
- None Available
Related Items
CUP70-12B2
XP POWER CUP70-12B2 External Plug-In Power Supply, AC/DC, 90-264VAC, 12V/5.5A,
CU15-14.
Switch Mode Power Supply Series:CU15 Output Voltage:24VDC Output Power Max:15W- CU15-09
PSU, OPEN PCB 15W 9VPSU, OPEN PCB 15W 9V Voltage, 
CDP3K Series
XP Power CDP3K Series Power Supply. AC/DC Rectifier/Front End