HUP80-31 - XP Power HUP80-31 59 W AC/DC Desktop Power Supply |...
- Part Number:
- HUP80-31
- Model Number:
- HUP80-31
- Make:
- XP POWER
- Lead Time:
- Available
- Qty In Stock:
- Available
XP Power HUP80-31 59 W AC/DC Desktop Power Supply | V1: +5.0V/6.0A Max. (0.5A Min.) | V2: +12V/2.1A Max. (0.2A Min.) V3: -12V/0.3A Max. (0.1A Min.) | 5% Regulation Tolerance (Line, & Load) Simple Type: Power Supply
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 100% Burn-in
- Approved to UL, CSA and TUV
- Built-in EMI Filter
- CE Mark
- Input Surge Current Protection
- Meets EN61000-3-2
- Safety Standards
- Wide Input Voltage 90-264 VAC
Specifications
- Coefficient: maximum
- Cooling: Convection cooled
- Dimensions: 3.09” x 6.61” x 1.75”
- Drift: ±1% mV
- Efficiency: 83% typical
- Hold-up time: 12 msec minimum
- Initial Set Accuracy: ±3%
- Input Current: 1.9A maximum
- Input Frequency: 47 to 63 Hz
- Input Protection: Internal 2 A fuse
- Input Voltage: 90-264 VAC
- Inrush Current: 15A max. at 115 VAC or 30A max. at 230 VAC cold start
- Isolation Voltage: 3000 VAC from input to output 1500 VAC from input to ground 500 VAC output to ground
- LED Indications: Green LED for AC OK & DC OK
- Line Regulation: ±1% maximum at full load
- Load Regulation: ±5%
- MTBF: 100,000 hours minimum at full load at 25 C ambient
- Operating: 0C to +70C, derate linearly from Temperature Range 100% load at +40C to 50% load at +70C
- Operating Humidity: 5-95% RH, non condensing
- Output Adjustment: ±5%, not user adjustable
- Output Current: See Tables
- Output Power Range: 0 to 80 Watts
- Output Voltage: See Tables
- Overload Protection: All outputs protected to short circuit conditions
- Overshoot/undershoot: 150% at turn on/off
- Overvoltage: Provided on output #1 only set at Protection 112-132% of its nominal voltage
- Ripple and Noise: 1% peak to peak max.
- Safety ground: 0.75 mA max at 240 VAC
- Short Circuit Protection: Hiccup mode
- Start Up Delay: 2 S max
- Start Up Rise Time: 2 mS
- Storage Humidity: 5-95% RH, non condensing
- Storage Temperature: -40 C to +85 C
- Temperature: All outputs ±0.04%/C
- Transient Response: Maximum excursion of 4% or better on all models. Recovers to 1% of final value within 500 µs after a 25% step load change
- Weight: 750 g approx
Applications
- None Available
Aliases
- None Available
