HUP80-12 - XP Power HUP80-12 80 W AC/DC Desktop Power Supply | 12.0V/6.6A Max. (0.0A Min.)

HUP80-12 - XP Power HUP80-12 80 W AC/DC Desktop Power Supply |...

XP Power HUP80-12 80 W AC/DC Desktop Power Supply | 12.0V/6.6A Max. (0.0A Min.) | 5% Regulation Tolerance (Line, & Load) Simple Type: Power Supply

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

General

Cooling: Convection cooled
Dimensions: 3.09” x 6.61” x 1.75”
Drift: ±1% mV
Efficiency: 83% typical
Hold-up time: 12 msec minimum
Initial Set Accuracy: ±3%
Input Current: 1.9A maximum
Input Frequency: 47 to 63 Hz
Input Protection: Internal 2 A fuse
Input Voltage: 90-264 VAC
Inrush Current: 15A max. at 115 VAC or 30A max. at 230 VAC cold start
Isolation Voltage: 3000 VAC from input to output; 1500 VAC from input to ground; 500 VAC output to ground
LED Indications: Green LED for AC OK & DC OK
Line Regulation: ±1% maximum at full load
Load Regulation: ±5%
MTBF: 100,000 hours minimum at full load at 25 °C ambient
Operating Humidity: 5-95% RH, non condensing
Operating Temperature Range0 °C to +70 °C, derate linearly from 100% load : Environmental
Output Adjustment: ±5%, not user adjustable
Output Power Range: 0 to 80 Watts
Overload Protection: All outputs protected to short circuit conditions
Overshoot/undershoot: 150% at turn on/off
Overvoltage: Provided on output #1 only set at Protection 112-132% of its nominal voltage
Ripple and Noise: 1% peak to peak max
Safety Ground Leakage Current: 0.75 mA max at 240 VAC
Short Circuit: Hiccup mode
Start Up Delay: 2 S max
Start Up Rise Time: 2 mS
Storage Humidity: 5-95% RH, non condensing
Storage Temperature: -40 °C to +85 °C
Temperature Coefficient: All outputs ±0.04%/°C maximum
Transient Response: Maximum excursion of 4% or better on all models. Recovers to 1% of final value within 500 µs after a 25% step load change
Weight: 750 g approx