HUP15A-12 - XP Power HUP15A-12 12V / 1.25A Max 15W Switching Desktop...
Request Quote
For Price
- Part Number:
- HUP15A-12
- Model Number:
- HUP15A-12
- Make:
- XP POWER
- Lead Time:
- Available
- Qty In Stock:
- Available
XP Power HUP15A-12 12V / 1.25A Max 15W Switching Desktop Power Supply Adapter Simple Type: Power Supply
The HUP15 Series of AC-DC switching power supplies provide 15 watts of continuous output power. They are enclosed in a 94V-0 rated polyphenylene oxide case with an IEC 320 inlet connector to mate with an interchangable cord for worldwide use. All models meet CISPR Class B and FCC Class B emission limits, and are approved to UL, CSA, and TUV safety standards.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 100% Burn-in
- Approved to UL, CSA, and TUV safety standards CE Mark
- Built-in EMI filter
- Input surge current protection
- Short circuit protection
- Small size, light weight
- Wide input voltage 90-264 VAC
Specifications
- Efficiency: 60% min at 15W output
- EMI requirements: Meets conducted and radiated limits of:FCC20780 Level B,CISPR 22 Class B
- Hold-up time: 5msec minimum
- Input current: 0.4A maximum
- Input frequency: 47 to 63 Hz
- Input voltage: 90 to 264 VAC
- Inrush current: 15 amps@115 VAC, or 30 amps@230 VAC at 25°C cold start
- Insulation resistance: 50 Mohm min. from output to ground
- Line regulation: ±0.5% maximum at full load
- MTBF: 100,000 hours minimum at full load at 25°C ambient
- Operating temperature: 0°C to +70°C
- Output power range: 0 to 15 Watts
- Overcurrent protection: All outputs protected to short circuit conditions
- Ripple and noise: 1% peak to peak maximum
- Safety ground leakage current: 0.75mA max. @ 240VAC 50Hz
- Safety requirements: Approved to:UL 1950, CSA C22.2 No. 234, EN60950
- Storage temperature: –40°C to +85°C
- Temperature coefficient: All outputs ±0.04%/°C maximum
- Transient response: Maximum excursion of 4% or better on all models. Recovers to 1% of final value within 500us after a 25% step load change.
- Withstand voltage: 3000 VAC from input to output, 1500 VAC from input to ground, 500 VAC from output to ground
Applications
- None Available
Aliases
- None Available