BCC400PS24 - XP Power BCC400PS24 Power Supply - 408W AC/DC Industrial Type,...
Request Quote
For Price
- Part Number:
- BCC400PS24
- Model Number:
- BCC400PS24
- Make:
- XP POWER
- Lead Time:
- Available
- Qty In Stock:
- Available
XP Power BCC400PS24 Power Supply - 408W AC/DC Industrial Type, Wide Operating Temperature Range Simple Type: Power Supply
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 3 Year Warranty
- Baseplate-cooled
- ETSI, EMC and Environmental Compliant
- Low Temperature Option
- Parallel Operation
- Remote On/Off
- Wide Operating Temperature Range
Specifications
- Cooling: Conduction via 6mm baseplate
- Current Share: Up to 3 power supplies can be connected in parallel sharing within 10%, total output power derates by 10%
- Earth Leakage Current: <1.5 mA at 230 VAC
- Efficiency: 80% typical
- Hold Up Time: 10 ms min
- Initial Set Accuracy: ±1% nominal
- Input Current: 3 A max at 90 VAC (BCC200), 6 A max at 90 VAC (BCC400)
- Input Frequency: 47-63 Hz
- Input Protection: Internal T10 A/250 V fuse
- Input Voltage: 90-264 VAC
- Inrush Current: 60 A at 264 VAC +25 ºC cold start
- Isolation: 3000 VAC Input to Output, 1500 VAC Input to Ground, 500 VAC Output to Ground
- Line Regulation: ±0.5%
- Load Regulation: See table
- Minimum Load: No minimum load
- MTBF: 160 kHrs to MIL-HDBK-217F at 25 ºC, GB
- Operating Humidity: 20-95% RH, non-condensing. Units can be conformally coated for high humidity environments - add suffix ‘-E’
- Operating Temperature: -20 ºC to +70 ºC, with baseplate maintained below +83 ºC utilizing system cooling, -40 ºC option available - add suffix ‘-L’ to model number
- Output Power: See table
- Output Voltage: See table
- Output Voltage Trim: 60% to 110% Vnom
- Overload Protection: 102-140% constant current limiting with auto recovery
- Overtemperature Protection: Shuts down at +115 ºC baseplate temperature, recycle mains to reset
- Overvoltage Protection: 105-140% Vnom (3.3 V version 130-166%)
- Power Factor: >0.9
- Remote On/Off: A logic ‘0’ on the Remote On/Off connection electronically disables the output
- Remote Sense: Compensates for lead drops of up to 500 mV
- Ripple & Noise: <1% pk-pk, 20 MHz bandwidth
- Shock & Vibration: 2 g 10 min/1 cycle, 10 Hz to 500 Hz, 60 mins each axis
- Storage Temperature: -40 ºC to +85 ºC
- Switching Frequency: PWM 360 kHz typ, PFC 90 kHz typ
- Temperature Coefficient: 0.05%/ºC
Applications
- None Available
Aliases
- None Available