IFC125-42-3 - XP Power IFC125-42-3 Power Supply - XP Power IFC125-42-3 125W...
- Part Number:
- IFC125-42-3
- Model Number:
- IFC125-42-3
- Make:
- XP POWER
- Lead Time:
- Available
- Qty In Stock:
- Available
XP Power IFC125-42-3 Power Supply - XP Power IFC125-42-3 125W AC/DC Switching Power Supply / Open Frame
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- -25 °C to +50 °C Full Power
- Active PFC - Meets EN61000-3-2, -3
- Current Share up to 4 Units
- Overvoltage & Overcurrent Protection
- Power Good Signal
- Single, Triple and Quad Outputs
- Small Size - 3.0” x 5.0” x 1.25”
Specifications
- Conducted Immunity: EN61000-4-6
- Cooling: 5 CFM airflow required for 125 W
- Current Share: Up to 4 supplies to share within 10%
- Dips & Interruptions: EN61000-4-11, 30% 10 ms, 60% 100 ms, 100% 5000 ms, Criteria A, B, B
- Earth Leakage Current: 0.5 mA max at 132 VAC/60Hz; 0.825 mA max at 264 VAC/50Hz
- Efficiency: 83% typical
- EFT/Burst: EN61000-4-4, level 3 Perf Criteria B
- Emissions: EN55022/CISPR22 and FCC, Class B conducted
- Harmonic Currents: EN61000-3-2
- Hold Up Time: >28 ms min at full load
- Initial Set Accuracy: ±5% maximum
- Input Current: 0.8 A max at 240 VAC; 1.8 A max at 100 VAC
- Input Frequency: 47-63 Hz
- Input Protection: Internal 2.6 A fuse
- Input Voltage: 90-264 VAC
- Inrush Current: 33 A max at 115 VAC; 66 A max at 230 VAC
- Isolation: 3000 VAC Input to Output; 1500 VAC Input to Ground; 500 VAC Output to Ground
- Minimum Load: 5 W minimum load on V1 or V2 required to maintain regulation
- MTBF: >220 kHrs per Bellcore
- Operating Altitude: 3000 m
- Operating Humidity: 5-95% RH, non-condensing
- Operating Temperature: -25 °C to +70 °C, derate linearly from 100% at +50 °C to 50% at +70 °C
- Output Voltage Trim: Not user-adjustable
- Over/Undershoot: 10% maximum
- Overload Protection: All outputs: 115-135%, auto recovery
- Overtemperature Protection: Unit shuts down, recycle input to reset
- Overvoltage Protection: V1 & V2: 113-148%, auto recovery
- Power Density: 6.66 W/In3
- Power Factor: 0.98 typical
- Radiated Immunity: EN61000-4-3, level 3 Perf Criteria B
- Remote Sense: V1 only compensates for 0.5 V drop
- Ripple & Noise: ±1% pk-pk maximum or =5 Vout 50 mV maximum
- Safety Approvals: EN60950, UL 60950, CSA950 per cUL, CE Mark LVD
- Shock: 15 G pk operating
- Short Circuit Protection: Trip and restart (Hiccup mode)
- Signals: Power Good - On is Logic High
- Start Up Delay: 1.5 s at 90 VAC
- Start Up Rise Time: 0.2-20 ms
- Storage Temperature: -40 °C to +85 °C
- Surge: EN61000-4-5, level 3 Perf Criteria B
- Temperature Coefficient: 0.04% / °C maximum
- Transient Response: 5% max. deviation, recovery to within 1% in 500 µs for a 25% load change
- Vibration: 2.4 G, 5 Hz to 500 Hz, 3 axis
- Voltage Flicker: EN61000-3-3
Applications
- None Available
Aliases
- None Available
