ECM100US48 - XP Power ECM100US48 Power Supplies-48V, 2.1A Switch Mode Power Supply...
Request Quote
For Price
- Part Number:
- ECM100US48
- Model Number:
- ECM100US48
- Make:
- XP POWER
- Lead Time:
- Available
- Qty In Stock:
- Available
XP Power ECM100US48 Power Supplies-48V, 2.1A Switch Mode Power Supply Simple Type: Power Supply
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- Class I and II Construction
- Compact Size
- Convectioncooled
- DC Input Version Available (DCM Series)
- IT & Medical Approvals
- PoE Isolation Version Available (POE Series)
Specifications
- Cooling: Convection & fan-cooled ratings(see derating curves)
- Cross Regulation: 2% on ECM40/60 only
- Earth Leakage Current: <125 µA at 115 VAC/60 Hz,<210 µA at 230 VAC/50 Hz
- Hold Up Time: 16/75 ms min at 115/230 VAC
- Initial Set Accuracy: ±1.0% V1, ±5% V2, V3 & V4
- Input Current: 0.9 A max at 230 VAC
- Input Frequency: 47-63 Hz; 440 Hz
- Input Protection: Internal T3.15 A, 250 V fuse in line and neutral
- Input Voltage: 90-264 VAC (120-370 VDC)
- Inrush Current: 40 A max at 230 VAC
- Line Regulation: ±0.5%
- Load Regulation: ±1% single output models;±3% V1, ±5% V2 & V3 ECM40/60 multi-output models. ±1% V1 & V2, ±5% V3 & V4 ECM100
- Operating Altitude: 3000 m
- Operating Humidity: 95% RH, non-condensing
- Operating Temperature: 0 °C to +70 °C. Refer to derating curves for specific operating limitations.
- Output Voltage Trim: ±5% on 3.3 V & 5 V versions, ±10% on other single output models and V1 of multi-output models. (See note 1 for ECM40/60 models)
- Over/Undershoot: None at turn on/off
- Overload Protection: 110-150% on primary power limit, auto recovery
- Overvoltage Protection: 115-135% Vnom, recycle input to reset
- Peak Load: 120% for 100 ms ECM40/60
- Power Density: 7.4 W/In3
- Power Factor: EN61000-3-2
- Ripple & Noise: 1% pk-pk, 20 MHz bandwidth
- Shock: 30 g pk, half sine, 6 axes
- Short Circuit Protection: Trip and restart (hiccup mode)
- Start Up Delay: 1.5 s max
- Start Up Rise Time: 10 ms max
- Storage Temperature: -40 °C to +85 °C
- Switching Frequency: 70 kHz typical
- Temperature: 0.05%/°C
- Transient Response: 4% max. deviation, recovery to within 1% in 500 µs for a 25% load change
- Vibration: 2 g rms, 5 Hz to 500 Hz, 3 axes
Applications
- None Available
Aliases
- None Available